Installation Guide


This is the detailed installation guide aimed at production installations. If you are looking to get started quickly, the Getting Started Using Minikube or the Quick Start guide may be better options.

This section describes how to install and run Cilium on Kubernetes. The deployment method we are using is called DaemonSet which is the easiest way to deploy Cilium in a Kubernetes environment. It will request Kubernetes to automatically deploy and run a cilium/cilium container image as a pod on all Kubernetes worker nodes.

Should you encounter any issues during the installation, please refer to the Troubleshooting section and / or seek help on Slack channel. See the Kubernetes Compatibility section for kubernetes API version compatibility.

Kubernetes Requirements

Mounting the BPF FS (Optional)

This step is optional but recommended. It allows the cilium-agent to pin BPF resources to a persistent filesystem and make them persistent across restarts of the agent. If the BPF filesystem is not mounted in the host filesystem, Cilium will automatically mount the filesystem in the mount namespace of the container when the agent starts. This will allow operation of Cilium but will result in unmounting of the filesystem when the pod is restarted. This in turn will cause resources such as the connection tracking table of the BPF programs to be released which will cause all connections into local containers to be dropped. Mounting the BPF filesystem in the host mount namespace will ensure that the agent can be restarted without affecting connectivity of any pods.

In order to mount the BPF filesystem, the following command must be run in the host mount namespace. The command must only be run once during the boot process of the machine.

mount bpffs /sys/fs/bpf -t bpf

A portable way to achieve this with persistence is to add the following line to /etc/fstab and then run mount /sys/fs/bpf. This will cause the filesystem to be automatically mounted when the node boots.

bpffs                      /sys/fs/bpf             bpf     defaults 0 0

If you are using systemd to manage the kubelet, another option is to add a mountd systemd service on all hosts:

Due to how systemd mounts filesystems, the mount point path must be reflected in the unit filename.

cat <<EOF | sudo tee /etc/systemd/system/sys-fs-bpf.mount
Description=Cilium BPF mounts



CNI Configuration

CNI - Container Network Interface is the plugin layer used by Kubernetes to delegate networking configuration. You can find additional information on the CNI project website.


Kubernetes `` >= 1.3.5`` requires the loopback CNI plugin to be installed on all worker nodes. The binary is typically provided by most Kubernetes distributions. See section Installing CNI and loopback for instructions on how to install CNI in case the loopback binary is not already installed on your worker nodes.

CNI configuration is automatically being taken care of when deploying Cilium via the provided DaemonSet. The script is automatically run via the postStart mechanism when the cilium pod is started.


In order for the the script to work properly, the kubelet task must either be running on the host filesystem of the worder node, or the /etc/cni/net.d and /opt/cni/bin directories must be mounted into the container where kubelet is running. This can be achieved with Volumes mounts.

The CNI auto installation is performed as follows:

  1. The /etc/cni/net.d and /opt/cni/bin directories are mounted from the host filesystem into the pod where Cilium is running.
  2. The file /etc/cni/net.d/10-cilium.conf is written in case it does not exist yet.
  3. The binary cilium-cni is installed to /opt/cni/bin. Any existing binary with the name cilium-cni is overwritten.

Installing CNI and loopback

Since Kubernetes v1.3.5 the loopback CNI plugin must be installed. There are many ways to install CNI, the following is an example:

sudo mkdir -p /opt/cni
sudo tar -xvf cni-0799f5732f2a11b329d9e3d51b9c8f2e3759f2ff.tar.gz -C /opt/cni
rm cni-0799f5732f2a11b329d9e3d51b9c8f2e3759f2ff.tar.gz

Adjusting CNI configuration

The CNI installation can be configured with environment variables. These environment variables can be specified in the DaemonSet file like this:

  - name: "MTU"
    value: "8950"

The following variables are supported:

Option Description Default
MTU Pod MTU to be configured 1450
HOST_PREFIX Path prefix of all host mounts /host
CNI_DIR Path to mounted CNI directory ${HOST_PREFIX}/opt/cni
CNI_CONF_NAME Name of configuration file 10-cilium.conf

If you want to further adjust the CNI configuration you may do so by creating the CNI configuration /etc/cni/net.d/10-cilium.conf manually:

sudo mkdir -p /etc/cni/net.d
sudo sh -c 'echo "{
    "name": "cilium",
    "type": "cilium-cni",
    "mtu": 1450
" > /etc/cni/net.d/10-cilium.conf'

Cilium will use any existing /etc/cni/net.d/10-cilium.conf file if it already exists on a worker node and only creates it if it does not exist yet.

Deploying the DaemonSet

$ wget
$ vim cilium.yaml
[adjust the etcd address]

After configuring the cilium ConfigMap it is time to deploy it using kubectl:

$ kubectl create -f cilium.yaml

Kubernetes will deploy the cilium DaemonSet as a pod in the kube-system namespace on all worker nodes. This operation is performed in the background. Run the following command to check the progress of the deployment:

$ kubectl --namespace kube-system get ds
cilium          4         4         4         <none>          2m

As the pods are deployed, the number in the ready column will increase and eventually reach the desired count.

$ kubectl --namespace kube-system describe ds cilium
Name:           cilium
Image(s):       cilium/cilium:stable
Selector:       io.cilium.admin.daemon-set=cilium,name=cilium
Node-Selector:  <none>
Labels:         io.cilium.admin.daemon-set=cilium
Desired Number of Nodes Scheduled: 1
Current Number of Nodes Scheduled: 1
Number of Nodes Misscheduled: 0
Pods Status:    1 Running / 0 Waiting / 0 Succeeded / 0 Failed
  FirstSeen     LastSeen        Count   From            SubObjectPath   Type            Reason                  Message
  ---------     --------        -----   ----            -------------   --------        ------                  -------
  35s           35s             1       {daemon-set }                   Normal          SuccessfulCreate        Created pod: cilium-2xzqm

We can now check the logfile of a particular cilium agent:

$ kubectl --namespace kube-system get pods
cilium-2xzqm   1/1       Running   0          41m

$ kubectl --namespace kube-system logs cilium-2xzqm
INFO      _ _ _
INFO  ___|_| |_|_ _ _____
INFO |  _| | | | | |     |
INFO |___|_|_|_|___|_|_|_|
INFO Cilium 0.8.90 f022e2f Thu, 27 Apr 2017 23:17:56 -0700 go version go1.7.5 linux/amd64
INFO clang and kernel versions: OK!
INFO linking environment: OK!

Deploying to selected nodes

To deploy Cilium only to a selected list of worker nodes, you can add a NodeSelector to the cilium.yaml file like this:

        with-network-plugin: cilium

And then label each node where Cilium should be deployed:

kubectl label node worker0 with-network-plugin=cilium
kubectl label node worker1 with-network-plugin=cilium
kubectl label node worker2 with-network-plugin=cilium

Networking For Existing Pods

In case pods were already running before the Cilium DaemonSet was deployed, these pods will still be connected using the previous networking plugin according to the CNI configuration. A typical example for this is the kube-dns service which runs in the kube-system namespace by default.

A simple way to change networking for such existing pods is to rely on the fact that Kubernetes automatically restarts pods in a Deployment if they are deleted, so we can simply delete the original kube-dns pod and the replacement pod started immediately after will have networking managed by Cilium. In a production deployment, this step could be performed as a rolling update of kube-dns pods to avoid downtime of the DNS service.

$ kubectl --namespace kube-system delete pods -l k8s-app=kube-dns
pod "kube-dns-268032401-t57r2" deleted

Running kubectl get pods will show you that Kubernetes started a new set of kube-dns pods while at the same time terminating the old pods:

$ kubectl --namespace kube-system get pods
NAME                          READY     STATUS        RESTARTS   AGE
cilium-5074s                  1/1       Running       0          58m
kube-addon-manager-minikube   1/1       Running       0          59m
kube-dns-268032401-j0vml      3/3       Running       0          9s
kube-dns-268032401-t57r2      3/3       Terminating   0          57m

Removing the cilium daemon

All cilium agents are managed as a DaemonSet which means that deleting the DaemonSet will automatically stop and remove all pods which run Cilium on each worker node:

$ kubectl --namespace kube-system delete ds cilium